Product Description

  1. Grillage Foundation:
    A properly constructed model of cast aluminum and metal parts, showing concrete footing grillage on platform of I beams, ant vibration mat, base plate and column. Complete on wooden base of size about 30×25 cm.
  2. Model of Foundation:
    Showing two walls of a room basement, foundation Footing, Foundation, concrete, sand filing, steps ground level etc. Size 45×40 cm Approximately.
  3. Pile Driving Machine Model:
    Showing a hoist, pile, hammer guides, sliding base etc, Size 60×40 cm. Approx
  4. Piles of Different Types:
    (A) Steel Sheet Pile.
    (B) Screw Pile.
    (C) Timber Pile.
  5. Wing Walls:
    An all-wooden and properly constructed model of three different types of wing walls, beautifully pointed & mounted on wooden base of about 30×45 cm. size.
  6. Pneumatic Caisson:
    A properly constructed large size dissected model showing main shell with cutting edge at the bottom. The roof has holes for vertical shaft for the passage of men & material and for the outer air into the working chamber. The model is made of wooden and metal parts and fitted on a wooden base of about 40×40 cm. size. Overall height of the model is about 52 cm.
  7. Model Of Bricks:
    Properly constructed models of ten different kinds and in 1/3 full size. Complete mounted on a base board with nomenclature.
    (A) Full size of brick with frong is about 70x37x25 mm.
    (B) Half bat
    (C) Three quarter bat
    (D) King Closer
    (E) Queen Closer
    (F) Queen Closer quarter
    (G) Beveled bat large
    (H) Beveled bat small
    (I) Bull Nose
    (J) Splay Header
  8. Bricklayer’s Scaffolding:
    Showing ledgers, putlogs, standards, brace and wall. Size 50x20x40 cm. Approx.
  9. Racking Shore:
    A properly constructed wooden model, showing rider, braces, sole piece, cleats, wall and wall plate etc. Complete on base with names of parts. Size approx. 35x20x60 cm.
  10. Flying Shore:
    Properly constructed model showing wall plate, cleats, straining piece, wedges, horizontal strut and inclined struts etc. Complete on base with walls and names of the parts Size about 40x20x40 cm.
  11. Centering of Arch:
    Model showing ribs, tie struts, leggings, trammel rods, bearer, easing wedges, posts, sleepers, wall etc. Size 50x15x30 cm. Approximately.
  12. Carpentry Joints:
    A set of 20 wooden joints in polished wooden box with nomenclature.
  13. Model of Door Leaf:
    The types are as under. Size about 65×30 cm. without hinges, made of timber
    wood, beautifully painted and labelled.
    (A) Fully paneled Door
    (B) Half paneled and half glazed Door
    (C) Sash Door
    (D) Ledged and braced Door
    (E) Flush Door
  14. Model of Doors With Surrounding Frames:
    Same as No. 10338, but with surrounding frame. Made of timber wood, beautifully painted and duly labelled. Complete with hold fasts, hinges, tower bolt etc. Overall size about 70×40 cm.
    (A) Fully panalled Door.
    (B) Half panalled and half glazed Door.
    (C) Sash Door.
    (D) ledged and braced Door.
    (E) Flush Door.
  15. Model of Venetained Door With surrounding Frame:
    Model showing style lock rail, venetain blades, panels, hold fasts, hanges tower-bolts etc. Overall size 70×40 cm approximately.
  16. Model of Windows:
    Different type, properly constructed, in timber wood, beautifully painted. Complete with frames.

    1. Louvred or Venetioan Window :
      Stationary, size 27×40 cm. approx.
    2. Double Hung Window:
      Top portion slides down and lower portion slides up, size about 35×50 cm.
    3. Sliding Window :
      Sliding horizontally, size 40×60 cm.
    4. Casement Window:
      Hinged at side, swings cutward, size about 27×40 cm.
    5. Awning Window :
      Hinged at top, swings outward, size 30×50 cm. approx.
    6. Hopper Window:
      Hinged at bottom, Swings into room, size about 30×45 cm.
    7. Bay Window:
      Stationary, projecting outside size about 40×60 cm.
  17. Corner Window Lintel:
    Showing two walls only without shutters. Size approx 35×40 cm. Properly constructed all wooden models.
  18. Model of Stair Cases:
    (A) Properly constructed and painted wooden models showing various details.
    (B) Dog-Legged stairs 32×30 cm. approx size.
    (C) Open Well stairs 32×30 cm. approx size.
    (D) Quarter Turn stairs 42×35 cm. approx. size.
    (E) Bifurcated stairs 75×35 cm. approx size.
    (F) Geometrical stairs 35×25 cm approx size
  19. Spiral Stair:
    All metal stairs parts are fitted on wooden base. Size approx. 42×30 cm.
  20. Lean to Roof Model:
    A wooden model showing part of wall stone carbon, drip moldings, rafters, purlin, slating, eave’s board and post. Complete on about 45×30 cm. size base board.
  21. Coller Beam Truss Model:
    Representing a wooden truss, properly constructed, complete with iron straps and names of the parts.
  22. King Post Truss Model:
    Representing a wooden truss, properly constructed, complete with iron straps and names of the parts.
  23. Queen Post Truss Model:
    Representing a wooden truss, properly constructed, complete with iron straps and names of the parts.
  24. Joints of Trusses:
    Set of four types of joints, properly constructed wooden models. Complete with iron straps and beautifully painted.
  25. Model of Steel Roof Truss:
    Showing different members such as principles rafters, tie, studs, gusset plates, rivets, etc. about 1.5 meter long span.
  26. Model of Roof Showing Ridge-Hip and Valley:
    L shaped, one end is provided with a hip and other end with a gabble.
  27. Model of Partition Wall:
    Showing heads, tie, studs, noggings, doorway, walls etc. Size 45×30 cm. approximately.
  28. Model of Jack Arch Flooring:
    For four bays showing different details such as girders, surrounding concrete arches, floor finish etc. Size 60×12 cm. Approximately.
  29. T Beam and Slab Reinforcement :
    A properly constructed model in wood, showing main girder with secondary girders, pillars, reinforcement, flooring, drip hanger etc. Complete on board.
  30. Two Rooms & Verandah:
    Properly constructed model in wood illustrating cross section of a building of two rooms and one verandah with sectional details. Complete on 40×30 cm. base approximately.
  31. Two storied Building:
    Of flat roof, showing different details including stair case. The first floor can be removed to see inside details, four rooms are shown in each floor. The model is sectionised so that students may get clear idea. Size 70×60 cm. Approximately