Product Description

  1. Model of Lancashire Boiler :
    Steel Shell is of about 75 cm long and 20 cm in diameter. Two large tubes known as fire tubes pass from end to end. At the front end from each tube a furnace fire grating is placed and a door is hinged. Brick work, seating and flues are shown in wood work. The boiler is complete with dead weight safety valve, manhole, mud hole, check valve high steam and low water safety valve, steam and water gauges, regulating draught doors, dampers with counter weights and chimney. The model is approximately one meter in length, 37 cm in breadth and 45 cm high. It is specially made dissectible for demonstration purposes.
  2. Model of Cornish Boiler:
    In appearance this boiler model is similar to Lancashire boiler with the difference that only one fire tube passes from end to end.
  3. Model of Babcock and Wilcox Boiler:
    It is a water tube boiler. The shell is 15 cm in diameter and 75 cm in length and is fitted with a super heater and with inclined water tubes over the furnace connected with headers. The model is fitted with stop valve, safety valve, water gauge, steam gauge, man hole, mud hole, regulating draught door, damper with counter weight and chimney. Seating and brick work are shown in wood work. The model is approximately one meter in length 28 cm in breadth and 77 cm high.
  4. Model of Locomotive Boiler:
    The model is especially designed to understand the working of a locomotive steam boiler. The steel shell is of about 20 cm dia and GO cm. in length. The fire box is provided with a door and grate. The dissected barrel shows it’s inside view. Hot gases after passing through the fire tubes enter the smoke box with a door, puzzle and the blast pipe. The model is approximately 100 cm. in length, 45 cm.
    high and 35 cm. in breadth and is complete with whistle, steam dome, safety valve, check valve, steam regulator water and steam gauges.
  5. Model of Cochran Boiler:
    The model is the best known vertical type fire tube boiler. The shell is about 25 cm. in diameter and 60 cm, high. The cylindrical fire box is with a door and grate at its bottom. Hot gasses pass from the fuel to the combustion chamber through a short flue pipe and then to chimney through the tubes. At both ends of the tubes covers are given and tubes can be cleaned after their removal. The model is complete with feed check valve, steam and water gauges, stop valve, safety valve and manhole.
  6. Vertical Water Tube Boiler:
    It is fitted inside a cylindrical fire box to increase the heating surface and improve
    the circulation of the water. The fire box is fitted with cross tubes. The model is complete with stop valve, check valve, safety valve, manhole, water gauge and steam gauge.
  7. Lamount Boiler model:
    Properly constructed non working model made of wooden and metal parts showing necessary parts such as boiler, feed pump, check valve, Economiser, Evaporimeter, mud-drum, Circulatory Pump, super heater, main valve, Bleeder, Ash Pan, Grate, overall size about 75 x 19 cm and height about 51 cm.
  8. Benson Boiler Model:
    Properly constructed non working model made of wooden and metallic parts. Showing necessary parts such as Economiser, Super heater, Separate Evaporator and feed pump etc. Overall size about 50 x 20 x 75 cm.
  9. Loefer Boiler Model:
    Properly constructed non working model made of wooden and metallic parts. Showing necessary parts such as Economiser, press Convection, Super heater, Steam Outlet, Radian Super Heater, feed pump and circulatory Pump etc. Overall size about 50 x 20 x 70 cm.
  10. Model of Velox Boiler:
    Properly constructed non working model made of wooden and metallic parts. Showing necessary parts such as Air Compressor, feed pump, steam separating section, Super heater, Economiser, gas turbine, water circulatory Pump, Steam Outlet etc. Overall size about 50 x 20 x 75 cm.
  11. Model of Marcet Boiler:
    A stove heated working model, giving working pressure of 45 lbs. per square inch. The vessel is about 20 cm in diameter and about 25 cm high. The unit is complete with lever action safety valve, thermometer jacket, pressure gauge, a set of slotted weights and tripod stand.
  12. Model of Sterling Boiler:
    It comprises two upper drum, Mud drum, Water Tubes, Baffle wall, super heater, Steam Pipe and stop valve etc. Made of wooden and metal parts. Size about 50 x 20 x 75 cm.