Product Description

The ’Swarg Systems & Instruments’ apparatus consists of a storage water tank, embraced by evaporator coil of the cooling unit, cooling cycle comprises of a hermetically seated compressor, air cooled condenser, a capillary tube as expansion device and an evaporator coil. The stainless steel water tank is provided with glass wool insulation on all sides and a door is provided at the top. Cold water can be taken out from a top provided and inlet water supply is controlled by a ball operated top. Various measurements provided enables students to determine the theoretical and actual COP, power consumption, actual cooling capacity refrigerant flow and compressor volumetric efficiency of compressor.

SPECIFICATIONS
1) Cooling Cycle

  • Compressor – Hermetically sealed type, having the capacity of 1/3 ton of refrigeration using R-134a refrigerant.
  • Finned tube type air cooled condenser with forced air flow.
  • Filter cum drier for refrigerant.
  • Capillary expansion device.
  • Evaporator coil embraced on stainless steel water tank, provided with glass wool insulation.

2) Water drain tap and float operated inlet water tap are provided for water tank with insulated lift door at top.
3) Measurements

  • Pressure gauges for evaporating and condensing pressure
  • Thermometers to measure refrigerant temperatures at inlet & out let of condenser and evaporator.
  • Dial type thermometer for water temperature.
  • Rotameter to measure liquid refrigerant flow.
  • Energymeter to measure compressor input.

4) Safety and Controls

  • Thermostat to put off compressor at set water temperature.
  • Pressostat to put off compressor if high or low pressure goes out of set limit.
  • Over load protector for compressor.

A technical manual will be supplied alongwith the unit,
Also, the unit is provided with an attractive & anti corossion powder coating.

SERVICES REQUIRED
1) Floor space of 1.5 m x 1.5 m.
2) Water supply of 5 lit/min.
3) 230 V, 15 A AC stabilised supply with earthing connection.